Remove the mains plug from the wall
socket.
Allow the appliance to cool down completely.
Cleaning and maintenance
Warning!
- Before cleaning or maintenance, always
switch off the appliance, remove the mains
plug from the wall socket and wait until the
appliance has cooled down.
- Do not immerse the appliance in water or
any other liquids for cleaning.
Caution!
- Do not use aggressive or abrasive cleaning
agents to clean the appliance.
- Do not use sharp objects to clean the
appliance.
Regularly check the appliance for possible
damage.
Regularly check the water reservoir for
possible leakage.
Clean the appliance after each use:
- Empty the water reservoir.
- Remove limescale and other
contaminants from the soleplate with
a damp cloth and a non-abrasive
cleaning agent.
- Clean the housing of the iron with a soft,
damp cloth.
- Clean the housing of the steam
generator with a soft, damp cloth.
Descaling the appliance (fig. A & B)
The appliance must be descaled after every
25 uses. If the appliance must be descaled,
use a suitable descaling agent.
Special descaling agents are available from
our service station.
Note: Princess will not be responsible for any
damage caused by descaling agents. Damage
caused by not regularly descaling the
appliance is not covered by the guarantee.
Warning!
- Before descaling the appliance, always
switch off the appliance, remove the mains
plug from the wall socket and wait until the
appliance has cooled down.
If the temperature indicator (8) goes off, the
soleplate (16) has reached the required
temperature. The iron is ready for use.
If you interrupt the process, place the iron
(1) with the soleplate (16) onto the iron
holder (17).
After use, place the iron (1) with the
soleplate (16) onto the iron holder (17).
Switch off the iron (1) using the on/off
switch (2).
Remove the mains plug from the wall socket.
Allow the appliance to cool down completely.
Steam ironing
Fill the water reservoir (14) with water.
Place the iron (1) with the soleplate (16)
onto the iron holder (17).
Insert the mains plug into the wall socket.
Switch on the iron (1) using the on/off
switch (2).
Switch on the steam generator (4) using
the on/off switch (5). The on/off indicator
(6) comes on. The steam generator starts
to heat the water.
Set the temperature using the temperature
control dial (7). The iron starts heating.
The temperature indicator (8) remains on
during the process.
If the temperature indicator (8) goes off, the
soleplate (16) has reached the required
temperature. The iron is ready for use.
If the water has reached the required
temperature, the ”steam ready” indicator
(11) will come on.
Set the steam volume using the steam
volume dial (9).
To supply a shot of steam during use,
press the steam shot button (10).
For continuous steam, keep the steam shot
button (10) pressed.
If you interrupt the process, place the iron
(1) with the soleplate (16) onto the iron
holder (17).
After use, place the iron (1) with the
soleplate (16) onto the iron holder (17).
Switch off the steam generator (4) using
the on/off switch (5).
Switch off the iron (1) using the on/off
switch (2).
Comments to this Manuals