Princess 321201 Specifications download pdf (Page 13)

13

EN

Setting the steam volume (fig. A)

Turn the steam volume dial (9) 

counterclockwise to increase the steam

volume.

Turn the steam volume dial (9) clockwise to 

decrease the steam volume.

”Water reservoir empty” indicator

(fig. A & B)

If the water level in the water reservoir (14) is

too low, the ”water reservoir empty” indicator

(12) will come on to indicate that the water

reservoir must be refilled.

Note: The steam generator is protected with a

safety valve. The cover can only be removed

from the water reservoir when the pressure is

below 1 bar.

Switch off the steam generator (4) using 

the on/off switch (5).

Switch off the iron (1) using the on/off 

switch (2).

Remove the mains plug from the wall 

socket.

Allow the appliance to cool down completely.

If necessary, press the steam shot button 

(10) to decrease the pressure in the water

reservoir more rapidly.

If the pressure has lowered sufficiently, 

loosen the cover (19) from the water

reservoir (14).

Fill the water reservoir (14) with the 

indicated amount of water. Refer to the

section ”Filling the water reservoir”.

Tighten the cover (19) to the water 

reservoir (14).

Hints for use

Dry ironing

Fill the water reservoir (14) with water.

Place the iron (1) with the soleplate (16) 

onto the iron holder (17).

Insert the mains plug into the wall socket.

Switch on the iron (1) using the on/off 

switch (2).

Set the temperature using the temperature 

control dial (7). The iron starts heating.

The temperature indicator (8) remains on

during the process.

Steam generator

To switch on the steam generator (4), set 

the on/off switch (5) to the ’I’ position.

The on/off indicator (6) comes on. The

steam generator starts to heat the water.

To switch off the steam generator (4), set 

the on/off switch (5) to the ’O’ position.

The on/off indicator (6) goes off.

Setting the temperature

(fig. A, C & D)

The temperature must be set according to the

type of fabric.

Warning! Always turn the temperature control

dial to the ’min’ position before inserting the

mains plug into the wall socket or removing

the mains plug from the wall socket.

Turn the temperature control dial (7) 

clockwise to increase the temperature.

The temperature indicator (8) remains on

during the process. The temperature

indicator (8) goes off when the soleplate

(16) has reached the required temperature.

Turn the temperature control dial (7) 

counterclockwise to decrease the

temperature. The temperature indicator (8)

remains on during the process.

The temperature indicator (8) goes off

when the soleplate (16) has reached the

required temperature.

Label Type of fabric Temperature

(fig. D) (fig. C)

A The fabric must not be ironed.

B Synthetic (acryl, modacrylic,

polypropylene, polyurethane) A

C Synthetic (acetate, triacetate) B

C Synthetic (metal, nylon,

polyester, viscose) B

C Silk B

C Wool C (dry ironing /

steam ironing)

C Cotton C (dry ironing /

steam ironing)

D Linen C (dry ironing /

steam ironing)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 85 86

Comments to this Manuals

No comments