Princess 232000 Specifications download pdf (Page 14)

14

EN

- The tea or the water can be boiled again

by pressing the start/stop button (10). The

tea or the water must not be cooled down

more than 5 °C below the set temperature.

Do not use the keep-warm function after

more than 20 minutes after the boiling time.

Cleaning and maintenance

Warning!

- Before cleaning or maintenance, remove

the mains plug from the wall socket and

wait until the appliance has cooled down.

- Do not immerse the appliance in water or

any other liquids.

Caution!

- Do not use aggressive or abrasive cleaning

agents to clean the appliance.

- Do not use sharp objects to clean the

appliance.

- Do not clean the appliance in the

dishwasher. It is not recommended to wash

the removable parts of the appliance or the

accessories in a dishwasher.

- Always clean the base with a soft dry cloth.

Remove the large filter (3) by turning it 

counterclockwise.

Clean the large filter (3) and the small filter 

(2):

- Disassemble the large filter (3) and the

small filter (2).

- Clean the large filter (3) and the small

filter (2) in soapy water.

- Thoroughly rinse the large filter (3) and

the small filter (2).

Clean the water boiler (4):

- Thoroughly rinse the inside of the water

boiler (4).

- Clean the outside of the water boiler (4)

using a damp cloth.

Place the small filter (2) into the large filter 

(3). Turn the lid (1) clockwise or

counterclockwise to lock the small filter (2).

Place the large filter (3) into the water 

boiler (4).

Place the water boiler (4) onto the base (5).

Press the start/stop button (10) again. The 

start/stop indicator lights white. The

appliance starts to heat the water. If the

process is completed, the start/stop

indicator flashes red.

Turn the lid (1) clockwise as far as possible 

until the arrow on the lid (1) aligns with the

steam marking on the large filter (3). The

filter with the tea leaves moves down and

makes the tea.

Boiling water (fig. A)

Place the appliance on a stable and flat 

surface.

Fill the water boiler (4) with water.

Place the lid (11) onto the water boiler (4).

Place the water boiler (4) onto the base (5).

Insert the mains plug into the wall socket.

Press the start/stop button (10). The start/

stop indicator flashes red. The boiling

indicator (8) comes on.

If necessary, set the temperature using the 

temperature button (6). The temperature

indicators (7) show the temperature level:

LOW (low), MED (medium), HIGH (high)

and BOIL (boil). Refer to the tables above.

Press the start/stop button (10) again. 

The start/stop indicator lights white. The

appliance starts to heat the water. If the

process is completed, the start/stop

indicator flashes red.

Keep-warm function (fig. A)

The tea or the water can be kept warm for

60 minutes at a temperature of approximately

75 °C.

Press the keep-warm button (9) to activate 

the keep-warm function. The keep-warm

indicator comes on.

Press the keep-warm button (9) again to 

deactivate the keep-warm function at any

time. The keep-warm indicator goes off.

Note:

- The keep-warm function switches off

automatically after 60 minutes or when the

water boiler (4) is removed from the base

(5). If the water boiler (4) is placed on the

base (5), press the keep-warm button (9)

again to activate the keep-warm function.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 79 80

Comments to this Manuals

No comments