Princess 322200 Specifications download pdf (Page 11)

11

EN

Shortly press the spray button (5) for •

a vaporised spray.

Keep the spray button (5) pressed for •

a dense spray.

Note: For delicate fabrics, moisten the fabric

using the spray function before use or put a

damp cloth between the soleplate and the

fabric. Do not use the spray function on silk or

synthetic fabrics in order to prevent staining.

Steam shot function (fig. A)

For steam ironing, the steam shot button can

be used to supply a shot of steam that can

penetrate the fabric and remove the most

stubborn creases.

Before you proceed, we would like you to

focus your attention on the following notes:

- Do not use the steam shot function for dry

ironing.

Press the steam shot button (4) once to •

supply a shot of steam.

Press the steam shot button (4) at intervals to •

iron vertically (curtains, hung garments, etc.).

Note: The steam shot function can only be used

at high temperatures. Do not use the steam

shot function when the temperature indicator

comes on. Only use the steam shot function

again when the temperature indicator goes off.

Ironing tips

Start ironing with a low temperature to •

reduce the ironing time and eliminate the

risk of scorching the fabric.

It is recommended to use low temperatures •

for fabrics that have unusual finishes

(sequins, embroidery, etc.).

If the fabric is mixed (e.g. 40% cotton, •

60% synthetic), choose the temperature for

the fabric requiring the lowest temperature.

If you do not know the composition of the •

fabric, determine the temperature by

testing on a hidden corner of the fabric.

Start ironing with a low temperature and

gradually increase the temperature.

If the fabric is not completely dry, the ironing •

process will become smoother. Always iron

silk fabrics when they are damp.

Do not iron areas with traces of perspiration •

or other marks in order to prevent staining.

It is recommended to iron silk, woolen or •

synthetic fabrics inside out.

It is recommended to iron velvet fabrics in •

the direction of the fibre without exerting

pressure on the appliance.

Cleaning and maintenance

Before you proceed, we need you to pay

attention to the following notes:

- Before cleaning or maintenance, always

switch off the appliance, remove the mains

plug from the wall socket and wait until

the appliance has cooled down.

- Do not immerse the appliance in water or

any other liquids for cleaning.

Before you proceed, we would like you to

focus your attention on the following notes:

- Do not use aggressive or abrasive cleaning

agents to clean the appliance.

- Do not use sharp objects to clean the

appliance.

Regularly check the appliance for possible •

damage.

Regularly check the water reservoir for •

possible leakage.

Clean the appliance after each use:•

- Empty the water reservoir.

- Remove limescale and other contaminants

from the soleplate with a damp cloth

and a non-abrasive cleaning agent.

- Clean the housing of the iron with

a soft, damp cloth.

Descaling the appliance

The appliance must be descaled after every 25

uses. If the appliance must be descaled, use

a suitable descaling agent. Special descaling

agents are available from our service station.

Note: Princess will not be responsible for any

damage caused by descaling agents.

Damage caused by not regularly descaling the

appliance is not covered by the guarantee.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 71 72

Comments to this Manuals

No comments