Princess 332832 Instruction for Use download pdf (Page 5)

PREPARATION FOR USE

Note: Only assemble accessories when the appliance is not working.

1. Insert hanger rods in the corresponding hole on top of the unit, and screw it in firmly by hand. Then fix

the rotatable hanger head on top of the rod.

2. Fill the water tank with water between Min and Max markings on the water tank. Use fresh water.

Distilled or filtered water is recommended to avoid scale and sediments. Never use hot water or any other

liquids as it may damage the water tank and/or the appliance. Note: Do not put any detergent, or soap,

or other additions into the water tank as it may damage the internal aluminium parts of the appliance.

3. Place the water tank back on the unit. Make sure the water tank is fixed in the right position before turning

on the unit. To detach the water tank for refilling, switch off the unit and unplug. To detach the water

tank for refilling, switch off the unit and unplug. Handle of tank is only used to carry the water tank,

not the whole unit.

4. Insert the hose in the hose connector, and turn the plastic nut firmly onto hose by hand (do not use any

tool). Insert the protruding parts of the hand protection plate into the slots of steam nozzle, see fig 2.

Note: Do not pull the hose with excessive force as it may damage the hose. Do not move the appliance

by grasping the hose. Only grasp the handle of the unit.

5. Hang the steam nozzle on the rotatable hanger head.

The vertical steamer comes with 6 other accessories, including fabric brush, folding rack, pants press, hard

sofa brush, lint brush and hand protection plate. These accessories are very useful for you during steaming.

• Fabric brush sweeps away unwanted threads, lint etc.

• Pants press clamps the crease out of pants and shirts for a straight and smooth result.

• Folding rack fixes the clothes to avoid movement during steaming.

• Hard sofa brush helps to clean.

• Lint pad removes hair, lint and animal fur for a professional finish.

• Hand protection plate protects your hand while steaming.

FABRIC BRUSH ASSEMBLY

1. Align the pegs of fabric brush alongside the holes on the steam Nozzle. See fig 3.

2. Push until the brush is firmly in position.

PANTS PRESS ASSEMBLY

1. Move the end of the pants press towards the peg at the bottom of steam nozzle.

2. Push the pants press gently until it is firmly in position. See fig 4.

3. Unlock the pants press by pushing buttons on both sides of pants press until they are released, and then

remove the pants press from the steam nozzle. See fig 5.

Warning: To avoid damage the locks, only remove the pants press when both buttons are unlocked.

fig. 2 fig. 3

fig. 4

1 2 3 4 5 6 7 8 9 10 ... 19 20

No comments

Princess 332832 Instruction for Use Page 5